Throttle mounting

Throttle is mounted to the rig or baseplate by clamping it down by 4 pcs of M5 theaded screws with washers.

For footprint dimensions, see drawings.


All of four (4) screws must be used in clamping. Tighten screws to sufficient torque (~2 Nm).

Mounting with Simucube Baseplate

Simucube Baseplate is a optional accessory that provides easy mounting, adjustability and comfort when using certain pedals. Mounting with Baseplate is identical to profile mounting which is shown below.

For more info and assembly instructions, see Simucube Baseplate.

Mounting directly to the rig

Throttle may be mounted also without Baseplate directly to the rig. Installation method depends on the rig model and construction. Most common methods are illustrated below.

Mounting on slotted profile with T nuts

Mounting on through-hole plate

Optional non-slip pedal pad

Pad is attached with an adhesive backing to the pedal face surface.