Simucube Mount


In stock

SC Mount | Direct Drive Force Feedback Sim Racing wheel base mount

Simucube Mount is specially designed for Simucube 2 and compatible with many other front-mounted Direct Drive Force Feedback wheel bases.

The perfect but straightforward mounting option for your Simucube wheel base is made from thick laser-cut quality steel with two-tone colors.


Simucube Mount is specially designed for Simucube 2 and other front-mounted Direct Drive Force Feedback wheel bases, offering racers the basic needs to get racing as easy as possible, with Simucube quality. With the adjustable design and ease of installation, the Simucube Mount facilitates multiple deck-mounting options compatible with most rigs and their existing mounting holes on the market today.

The Simucube Mount enables a 20° degree tilt angle for Simucube 2 Sport and Pro wheelbases and the maximum of 12.5° degree tilt angle for the Simucube 2 Ultimate wheel base, if the rear of the Ultimate wheelbase touches the surface. Adjusting the tilt angle is quick and straightforward with screws included in the package. Find the list of screws included in the package below.

Made of a 3mm wide steel plate, the Simucube Mount is unbendable. During the development of the Simucube Mount it has gone through rigorous evaluation process and passed even the highest torque and force-demanding tests with flying colors. As a finishing touch, the Simucube Mount has been coated with two-tone color industrial quality paint, iconic to Simucube brand.

Screws included in the package:

  • 4 x M5x10 button head
  • 4 x M5 washer
  • 4 x M8x25 button head
  • 4 x M8 washer
  • 4 x M8 nyloc nut
  • 4 x M6x12 cap head screw
  • 4 x M6 washer

Additional information

Weight 1,48 kg
Dimensions 17 × 18 × 14 cm

Maximum height 185 mm, Minimum height 155 mm, Width 164 mm, Depth 128 mm

Net weight

1.3 kg

Maximum tilt angle

20° degrees (Simucube 2 Sport & Pro), 12.5° degrees (Simucube 2 Ultimate) if the rear of the Ultimate wheel base touches the surface


3 mm steel plate

Hole pattern

78.4 mm x 66 mm, compatible with many readily available deck mounts

Customer Reviews

Based on 18 reviews

Simucube Mount

Alex Pappas

After about 50 crashes on touge modded maps in Assetto Corsa, where the FFB goes crazy because of the broken off road physics, the side bolts needed to be screwed again. This is an extreme FFB scenario impossible to replicate in any other racing scenario. It might be avoided if we had 3 bolts on each side instead of 2. On the user side, I highly recommend setting a "teleport to pits" button to avoid the touge crash physics altogether. The FFB will go crazy and it might hurt you or the motor in the long run.

Edoardo Leo
it's good, but the mounting..

i haven't had any flex problems with the simucube mount, however there's one big problem to be noted, whatever the structural reason is to keep the wheel base suspended from the ground, it's letting the desk mount to hold all the weight up, and it causes inevitabily some flex, also to be noted that once the base is mounted it's hard to do maintenance on the screws as they just under the wheel base. And some screws are so little that they easily brake. Overall apart from these issues i haven't had any other problems.

Maximilian-Emanuel von Waldenfels
Viel besser als meine alte Base

Nicht zu vergleichen mit meiner DD1 die ich zuvor hatte

Vor allem was die Software angeht funktioniert hier einfach alles auf Anhieb.

Feedback is top.

Würde ich safe nochmal kaufen!


5/5 would recommend

Very adjustable very solid and sleek clean look