Wireless wheels

From version 2.0.0 onwards, the Tuner software Simucube supports wireless wheels through Simucube Link Hub.

Getting started¶

Connect a new wheel¶

Press Add device button
Select Wireless wheel from list
Turn on the wheel
Select the wheel from the list and press Connect button

Select Wireless Wheel from the device list
Press Configure button

Disconnect a wheel¶

From the wheel config menu press Disconnect button
Turn off the wheel

Forget a connected wheel¶

From the wheel config menu press Forget button on the row of the wheel you want to forget

Select Wireless Wheel from the device list
Press Configure button

Calibrate analog paddles¶

Follow the instructions on the screen and adjust the maximum and minimum values of the analog paddles
so that in the end the resting position the output is 0% and when the paddle is fully pressed the output is 100%

Change analog paddles function¶

Select the desired function for each analog paddle from the drop-down menu

Input configuration¶

Open Input tab¶

Select Wireless Wheel from the device list
Select Input tab from the top of the wheel preview

Bite point adjustment¶

Use the slider labeled Adjust Bite Point to adjust the bite point
- this will adjust max value of the secondary axis.
- Test the bite point by pressing the analog paddles

LED config¶

Open LED config tab¶

Select Wireless Wheel from the device list
Select LED tab from the top of the wheel preview

Adjust LED brightness¶

Use the slider labeled LED Brightness to adjust the brightness of the LEDs

Select LED Profile¶

Select the desired LED profile from the LED Brightness drop-down menu

Test Telemetry effects¶

Press a Test button next to the effect you want to test
The effect will be displayed on the wheel LEDs

Select SIMULATOR CONNECTED from the bottom of the left side menu

Select game¶

The game that is currently running will be automatically selected,
but you can also adjust settings for other games by selecting them from the Select game drop-down menu in the top right corner

Selecting a car profile¶

If the game you are playing offers the car name through the telemetry, the current car will be automatically added as a tab to the car configuration menu.
5 previously used cars will be displayed.
Check the Use car specific profile checkbox to use a car specific profile
If the game does not offer the car name through the telemetry or Use car specific profile is not checked the Default car will be used.

RPM range values¶

First shift light¶

RPM value for when the first shift light turns on.

Last shift light¶

RPM value for when the last shift light turns on.

Over rev blink¶

RPM value for when the blinking starts.

Engine rev limit RPM or Rev limit¶

RPM value for the maximum RPM of the car.

Adjusting RPM range values¶

If the game you are playing offers the car rpm range through the telemetry, the RPM values are ignored and can not be adjusted.
To adjust the RPM range, you need to unselect the Use car specific profile checkbox and adjust values in the Default car profile.
The RPM range can be specified as Relative or Absolute.
Relative means that the RPM range values are relative to the Engine rev limit RPM and set as percentages between the different RPM values.
Absolute means that the RPM range values set as RPM values.
If desired, the RPM ranges can be adjusted separately for each gear using the table in section Change shift lights by active transmission gear.