{"id":45956,"date":"2024-11-19T02:02:02","date_gmt":"2024-11-19T00:02:02","guid":{"rendered":"https:\/\/simucube.com\/mechanical-adjustments\/"},"modified":"2024-11-19T02:02:03","modified_gmt":"2024-11-19T00:02:03","slug":"mechanical-adjustments","status":"publish","type":"page","link":"https:\/\/simucube.com\/docs\/simucube-throttle\/mechanical-adjustments\/","title":{"rendered":"Mechanical adjustments"},"content":{"rendered":"
Pedal face height, angle, force curve and tilt may be mechanically adjusted with the included Torx key.<\/p>\n<\/p>\n
To adjust the height of pedal face:<\/p>\n
<\/p>\n<\/p>\n
To adjust the angle of the pedal face:<\/p>\n
<\/p>\n<\/p>\n
<\/p>\n<\/p>\n
\n <\/p>\n<\/p>\n
During spring replacement, do not let the pedal go out of bounds of nominal movement as illustrated in the image below.<\/p>\n
<\/p>\n
Keep the pedal upright during the change:<\/p>\n
<\/p>\n
1: Apply pressure to pedalface
\n
\n2: Unscrew end stop<\/p>\n
\n<\/p>\n
3: Release pressure slowly from pedalface and slide shaft assembly out<\/p>\n
\n<\/p>\n
4: Remove spring<\/p>\n
\n<\/p>\n
5: Remove plastic ring from spring<\/p>\n
<\/p>\n
<\/p>\n
6: Install new spring by reversing the previous steps. Note that plastic ring should point to rear of the Throttle. Ring protects aluminium part from scratches.<\/p>\n
\n<\/p>\n
Pre-installed spring is red curve on diagram. From the additional springs, blue curve is softer and green curve is harder.<\/p>\n<\/p>\n
Throttle has adjustments for preload & travel. Choose the positions according to your preferred feel.<\/p>\n
\n <\/p>\n
\n <\/p>\n<\/div>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
Pedal face height, angle, force curve and tilt may be mechanically adjusted with the included Torx key. Pedal face height\u00b6 To adjust the height of pedal face: Loosen, don\u2019t remove, the two (2) screws fixing the pedal, one on each side Adjust the pedal height Tighten the screws to approximately 3 Nm torque Pedal face…<\/p>\n","protected":false},"author":5610,"featured_media":0,"parent":50609,"menu_order":9000,"comment_status":"closed","ping_status":"open","template":"page-docs.php","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-45956","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"\n