This bundle is geared towards racers who want the most authentic racing experience. The best possible gear to win every race.
The bundle contains the following products
Just add in your favorite wheel and get ready to race.
SC2 Ultimate Bundle – Direct Drive Force Feedback Sim Racing Starter Bundle for Professional Racers
Professional no-compromise products for the Professional Racers. Simucube Ultimate Bundle combines the best possible gear to win races — Simucube 2 Ultimate 32 Nm Wheel Base with Heusinkveld Ultimate+ Pedals. It’s the kit that gives you the most authentic driving experience and competitive advantage. Choose your set of high-end Sim Racing Steering Wheels to accompany your tools and get ready to win anytime, anywhere as much as you want.
32 Nm. torque
24 bit sensor
60 month warranty on Simucube 2 Ultimate
Maximum height 185 mm, Minimum height 155 mm, Width 164 mm, Depth 128 mm
|Maximum tilt angle||
20° degrees (Simucube 2 Sport & Pro), 12.5° degrees (Simucube 2 Ultimate) if the rear of the Ultimate wheel base touches the surface
3 mm steel plate
78.4 mm x 66 mm, compatible with many readily available deck mounts
The body of Simucube 2 is built from precision machined solid metal parts. It’s pretty hard to find a plastic piece in it – pretty much the only non-metallic one is the antenna for the Wireless Wheel Receiver.
The motor is an extraordinary one. Simucube developer team compared over 40 motors, hand-tested over ten of them, picked the best three motors, and finally customized them to suit flawlessly in direct drive racing simulation. SC2’s latest generation motor technology delivers unforeseen torque response rate and clarity. FEM optimized motor magnetic design yields practically zero torque ripple and magnetic cogging. Simucube 2 ‘s are also individually tested and verified to exceed inhumanly tight tolerances in production.
To unleash the full potential of the glorious motor and to process signals at maximum precision, Simucube 2 has been given a dedicated 216 MHz real-time processor in addition to a dedicated 144 MHz PC USB interface CPU. Unique dual CPU architecture ensures zero impact on ultra-low latency performance even when all processing and simulator actions are running simultaneously. The new 216 MHz processor features superscalar ARM architecture, making it effectively four times faster than the 72 MHz processors of IONI drive in Simucube 1.
All Simucube 2’s electronics have been designed in Finland by Granite Devices. The team that is also known for their reliable industrial motor drives. Simucube is built with the same uncompromising industrial quality principles. This means prioritizing ruggedness and longevity over the cost of the components. Simucube 2 power MOSFETs are rated over 2X their actual need to make them virtually immortal.
Simucube 2 Pro Direct Driver motor comes equipped with precision industrial robotics grade angle sensors with a resolution of 4 Million steps per revolution. The quality of the angle sensor information has paramount importance when calculating natural physics effects and filters. Any imperfection of the sensor signal would feel like a distortion in reality. All Simucube 2’s signal processing units are optimized to take full advantage of the unmatched sensor precision.
No Simucube driver shall ever become the victim of an interference-prone USB connection. Thanks to a galvanic isolation layer between the USB and power electronics. This also protects the PC from current spikes. Also, all connectors found on the back of Simucube 2 are ESD protected, exceeding the industrial requirements
Thanks to high-efficiency direct-drive operation optimized motors and clever electronics heat guiding; there is no dust collecting nor noisy fans in Simucube 2. A High-efficiency motor puts out less heat and consumes less power.
Because high torque may pose a hazard if the simulator software goes nuts or if the driver becomes careless with the high torque wheel, every SC2 comes with an externally mountable Torque-off button. Optionally the button box may be upgraded to a stylish all-metal version with an additional external power switch.
|SIMUCUBE 2 Sport||SIMUCUBE 2 Pro||SIMUCUBE 2 Ultimate|
|Motor||Direct Drive optimized ultra low torque ripple motor||High response speed Direct Drive optimized ultra low torque ripple motor||Maximum response speed, low inertia, Direct Drive optimized ultra low torque ripple motor|
|Simucube Wireless Wheel™ support||Included||Included||Included|
|Simucube Quick Release™||Not included||Not included||Included|
|Max torque *||17 Nm||25 Nm||32 Nm|
|Max torque slew rate||4.8 Nm/ms||8.0 Nm/ms||9.5 Nm/ms|
|Angle sensor||22 bit absolute||22 bit absolute||24 bit Hiperface|
|Torque Off button||Standard (Premium optional)||Standard (Premium optional)||Premium (with remote power switch)|
|Power supply||280 W||R2 1 x 450 W Peak||1000 W|
|Wheel base dimensions incl. SQR™||130 x 130 x 250 mm||130 x 130 x 270 mm||115 x 115 x 310 mm|
|Mounting holes||M8 x 4 pcs threaded hole||M8 x 4 pcs threaded hole||9 mm dia x 4 pcs through hole|
|Mounting hole pattern dia||145 mm||145 mm||130 mm|
|Flange centering hole dia||110 mm||110 mm||110 mm|
|Wheel base weight||8.0 kg||11.1 kg||11.3 kg|
|Standard warranty||24 months||24 months||60 months|
|MSRP, € incl VAT/Sales tax||1270||1470||3170|
*) Torque is continuous until motor gets very hot. In preliminary testing, no-one has managed to cause torque to start throttling.
|SIMUCUBE 2 Sport||SIMUCUBE 2 Pro||SIMUCUBE 2 Ultimate|
|Torque reconstruction processing||Yes||Yes||Yes|
|Static force reduction||Yes||Yes||Yes, in detail adjustable|
|Natural Damping, Inertia and Friction filters||Yes||Yes||Yes, in detail adjustable|
|Ultra low latency mode||Yes||Yes||Yes|
|Torque slew rate adjustment||1 – 4.8 Nm/ms||1 – 8.0 Nm/ms||1 – 9.5 Nm/ms|