{"id":45980,"date":"2024-06-17T02:00:03","date_gmt":"2024-06-16T23:00:03","guid":{"rendered":"https:\/\/simucube.com\/en-gb\/activepedal\/mounting\/"},"modified":"2024-06-17T02:00:04","modified_gmt":"2024-06-16T23:00:04","slug":"mounting","status":"publish","type":"page","link":"https:\/\/simucube.com\/en-gb\/docs\/activepedal\/mounting\/","title":{"rendered":"Mounting"},"content":{"rendered":"
ActivePedal is mounted to the rig<\/abbr> or baseplate by clamping it down by 4 to 6 pcs of M5 theaded screws with washers. <\/p>\n For ActivePedal footprint dimensions, see specifications<\/a>.<\/p>\n <\/p>\n Info<\/p>\n Minimum of four (4) screws must be used in clamping, but use all six (6) if possible. Tighten screws to sufficient torque (~2 Nm).<\/p>\n If<\/em> you’re limited using four (4) screws and<\/em> you can choose which ones to use, then prefer to use the front<\/strong> side and the back<\/strong> side screw holes of the pedal. This likely yields stiffer installation which in turn helps the dynamic performance and reduces the chance of oscillation<\/abbr>.<\/p>\n<\/div>\n Simucube Baseplate is a optional accessory that provides easy mounting, adjustability and comfort when using certain pedals. <\/p>\n For more info and assembly instructions, see Simucube Baseplate<\/a>.<\/p>\n ActivePedal may be mounted also without Baseplate directly to the rig<\/abbr>. Installation method depends on the rig<\/abbr> model and construction. Most common methods are illustrated below.<\/p>\nMounting with Simucube Baseplate\u00b6<\/a><\/h2>\n
Mounting directly to the rig<\/abbr>\u00b6<\/a><\/h2>\n